Stone Care for Marble Floors
The Importance of Cleaning
Stone Care is a simple process which involves daily removal of ordinary dirt and soil is an important phase in the maintenance of marble. Sweeping compounds containing oil must never be used on marble because they will eventually discolor the surface. If floor is heavily trafficked it should be cleaned daily and rinsed with clean water until all traces of dirt solution are removed. Marble should then be allowed to dry.
Marble Maintenance Procedures
Stone care and cleaning of marble products is quite simple. If the proper procedures are followed, products will maintain their natural beauty and durability for a lifetime. To ensure the best service from marble products, clean the product thoroughly after installation, and follow up a regular maintenance program.
Immediately after completing installation, wash the floor clean of loose debris, dirt and foreign material. Use clean, soft cloths, sponges or mops and fresh warm water. Allow to dry. A second rinse application may be required to remove any additional film. Apply a thin, even coat of sealer and allow to dry for 3-5 minutes, removing excess sealer before it dries. Finished area can be used for normal foot traffic in 3-5 hours, but must be kept dry and free of staining agents for 72 hours.
Why Does Marble Need Maintenance?
Because marble is naturally porous, it is necessary to use a penetrating (not surface) sealer for stone care. Such penetrating products fill the pits and voids and actually become an integral part of the floor itself. The primary purpose of sealing is to provide protection to the marble itself. Marble floor should not be sealed until the surface is thoroughly cleaned and dried.
Why Marble Should Be Kept Clean?
The secret to beautiful marble is merely keeping it clean. Complicated cleaning agents and maintenance procedures will never be needed if the marble surfaces are regularly cleaned. Soap or abrasive type cleaners should never be used on marble surfaces. This type of cleaner reacts with the calcium carbonate to build a soapy scum which destroys the beauty of the marble and forms a greasy or slippery film that will catch or hold dirt.
How do I maintain the beauty of my natural stone?
At Stone Tile Depot, we take great pride in the careful maintenance and selection of our products. The following steps are helpful in maintaining the luster and vibrancy of your products:
- Stone Tile Depot carries a full line of Natural Stone Care Products for your needs.
- For regular maintenance and cleaning, we recommend soap and water and/or specific natural stone care products. Do not use any harsh chemicals or abrasives.
- For yearly maintenance, we recommend sealing your stone to insure the highest level of protection from stains and scratches.
- If something unfortunate does occur, please feel free to give any of our Sales Representatives a call.
For additional information please visit: Miracle Sealants for best stone care.
Disclaimer: The information provided at this page is property of StoneTileDepot.com and cannot be copied without a written authorization. StoneTileDepot.com is not responsible for any damages, losses or injuries that may be caused by the information provided here.